Lux Intelligent - Knowledge Base

We take being an easy company to work with very seriously and are constantly developing our customer support to offer more services, free, to customers.

How do I set up a Lux Intelligent emergency light testing system?

There are four stages to setting up a system.

Stage 1:  Select your luminaires and the type of system you wish to have i.e. non-maintained system with standalone lights, or a general scheme that uses a number of the general lighting fittings to provide emergency illumination.  If retrofitting, decide on how many emergency lights you have to monitor.

Stage 2:  Install you emergency lights and/or PLU Modules.  Confirm your data wiring and mains wiring is fault free.

Stage 3:  Configure your site by defining your lights in terms of text, zones and testing timetable.  Match the PLU serial numbers with the addresses to be used.  Once this information is gathered, the panel can be programmed.  For small installations, this can be done at the panel, when not much text entry is required.  For larger sites, this can be done easier using the lighting configuration tool.

Stage 4:  Decide on how you plan to manage the monitoring of the panel(s).  Is the logger tool to be used in isolation or is the data to be uploaded and shared using the Lux Intelligent cloud.  Once decided, install and configure the Lux Intelligent logger, as well ensuring the necessary connections to the panels have been configured.  Also, if the cloud is to be used, the Lux Intelligent sync tool will also need to be installed and configured

There are full installation guides and step by step walk throughs available which detail the process of setting up the Logging Software and the Cloud based monitoring and reporting.